ServoWorks™ S-200M™ (under development) is an innovative PC-based industrial CNC controller for powerful 5-axis machining of complex free-form shapes in a single setup. ServoWorks S-200M controls 7 axes plus a spindle: 5 coordinated CNC axes, and two axes that can be used for PLC axes, synchronous control, or linear scale feedback.

• 5 axes simultaneous control, plus a C axis (spindle) for tapping and positioning capability
• Rigid tapping
• Complete dual-axis synchronous control
• Corner deceleration control for sharper corners while maintaining high feedrates away from corners
• 1000 cycle three-dimensional dynamic look-ahead contour control (3D-DLACC) with pre-interpolation acceleration for high-speed, high-precision milling [VersioBus II interface system: one second look-ahead for 1 ms position feedback rate]
• High-speed / high-precision machining: 60 m/min (2400 in/min)
• Complete drilling and boring canned cycles

• Tilted working plane commands to greatly simplify part programming, and automatically define the tool axis as perpendicular to the tilted plane
• Three-dimensional coordinate conversion to convert programming in a XY/ZX/YZ plane to any 3D plane
• Three-dimensional circular interpolation to program arcs and circles on a tilted working plane
• Three-dimensional handle feed to simplify tilted working plane machine setup
• Tool center point control to control the movement of the tool center point even if the rotary axes change
• Rotary table dynamic fixture offset to set up a workpiece on a fixture rotated on a rotary table

• PLC axes for independent, individual positioning
• Integrated soft motion and soft PLC (ideal for high-speed milling)
• Includes LadderWorks PLC, an independent PLC package including a real-time soft PLC Engine and the LadderWorks Console – a Win32 application with a user-friendly ladder editor for editing, monitoring, debugging and compiling PLC sequence programs

• Macro functions
• Provides powerful, automatic execution of motion (part) programs, processing up to 1000 blocks per second
• Linear scale feedback control
• 6 workpiece coordinate systems
• Maximum positioning speed: 300 M/min
• Operates with or without a touch panel
• Can be used with a manual pulse generator (handwheel)
• Includes the ServoWorks MotionLite application for servo setup, configuration and tuning
• Can operate on the EtherCAT, VersioBus™ II, Panasonic Realtime Express™, MECHATROLINK™,Mitsubishi SSCNET™, or CANopen communication platforms
• The ServoWorks S-200M Windows HMI application can be fully customized by using the ServoWorks Development Kit (SDK)

• Tool offset compensation: geometry and wear offsets
• 256 pairs of tool offsets
• Tool length compensation in the tool axis direction
• Three-dimensional cutter radius compensation
• Thermal growth compensation along tool vector

• Manual spindle control
• Spindle CW (M03) and spindle CCW (M04)
• Spindle stop (M05)
• Spindle speed override (50-120%)
• Constant surface speed control (CSS)
• Actual spindle speed measurement and display
• Spindle orientation
• C axis control
• Spindle gear change — supports up to 4 gear stages